Special Applications
These
configurations use special ion exchange resins and media, and are designed
to address specific contaminant concerns such as sulfur, nitrates,
alkalinity, chlorine and pH.
Dealkalization
Kinetico’s DA Series specify the operation of Kinetico products, modified to
operate
as dealkalizer systems. These systems reduce alkalinity through the
chlorine exchange of
bicarbonate ions.
Nitrate Reduction
Kinetico’s NR Series specify the operation of Kinetico products, modified to
operate as
Nitrate Reduction systems. These systems reduce Nitrate through the use of selective ion
exchange media.
Up-Flow
Neutralizers
Up flow
neutralizer systems are available for the adjustment of low pH streams.
These units use calcite media to add carbonate to the water, which acts as a
buffer to low
pH sources.
Dechlorination
Up flow
dechlorination systems are available for the removal of free chlorine from
feed
supplies. These units use carbon media to remove organics and free
chlorine from feed
water.
Automatic Neutralizers
The
neutralizer system is designed to integrate with an automatic deionization
system
allowing for the pH adjustment of spent chemicals generated during
regeneration of
deionization systems. The neutralizer operates in a batch
mode, adjusting the batch
to within a preset range, as defined by the user.
Membrane Clean in Place Systems
During the
operation of the RO system the membranes are subject to the dissolved
materials present in the feed water. These materials periodically require
cleaning from
the RO system. The CIP System is designed to integrate with Kinetico’s TI RO system,
allowing the unit to go through periodic cleaning
cycles. The cleaning process uses
a variety of chemicals depending on the
type of fouling present.
